Gibt es einen MySQL-Befehl zum Auffinden der my.cnf
-Konfigurationsdatei, ähnlich wie PHPs phpinfo()
seinen php.ini
sucht
Es gibt keinen internen MySQL-Befehl, um dies zu verfolgen, es ist etwas zu abstrakt. Die Datei befindet sich möglicherweise an fünf (oder mehr?) Speicherorten. Sie sind alle gültig, da sie kaskadierend geladen werden.
Dies sind die Standardspeicherorte, die MySQL betrachtet. Wenn mehr als eine gefunden wird, werden alle geladen und die Werte überschrieben (in der aufgelisteten Reihenfolge, denke ich). Auch der --defaults-file
-Parameter kann das Ganze außer Kraft setzen, also ... im Grunde ist es ein enormer Schmerz im Hintern.
Aber dank der Verwirrung gibt es eine gute Chance nur in /etc/my.cnf.
(Wenn Sie nur die Werte sehen möchten: SHOW VARIABLES
, aber Sie benötigen die Berechtigungen, um dies zu tun.)
Sie können MySQL tatsächlich nach einer Liste aller Speicherorte "anfragen", an denen My.QL nach my.cnf (oder my.ini unter Windows) sucht. Es ist jedoch keine SQL-Abfrage. Führen Sie stattdessen Folgendes aus:
$ mysqladmin --help
oder vor 5.7:
$ mysqld --help --verbose
In den allerersten Zeilen finden Sie eine Nachricht mit einer Liste aller my.cnf-Standorte, nach denen gesucht wird. Auf meiner Maschine ist es:
Default options are read from the following files in the given order:
/etc/my.cnf
/etc/mysql/my.cnf
/usr/etc/my.cnf
~/.my.cnf
Oder unter Windows:
Default options are read from the following files in the given order:
C:\Windows\my.ini
C:\Windows\my.cnf
C:\my.ini
C:\my.cnf
C:\Program Files\MySQL\MySQL Server 5.5\my.ini
C:\Program Files\MySQL\MySQL Server 5.5\my.cnf
Beachten Sie jedoch, dass an einem dieser Speicherorte möglicherweise keine my.cnf-Datei vorhanden ist. Sie können die Datei also selbst erstellen - verwenden Sie eine der in der MySQL-Distribution enthaltenen Beispiel-Konfigurationsdateien (unter Linux - siehe /usr/share/mysql/*.cnf
-Dateien, und verwenden Sie die für Sie geeignete Einstellung - kopieren Sie sie in /etc/my.cnf
und ändern Sie sie nach Bedarf).
Beachten Sie außerdem, dass there auch eine Befehlszeilenoption --defaults-file
enthält, die einen benutzerdefinierten Pfad zu meiner.cnf- oder meiner.ini-Datei definieren kann. Dies ist beispielsweise für MySQL 5.5 unter Windows der Fall. Es zeigt auf eine my.ini-Datei im Datenverzeichnis, die normalerweise nicht mit mysqld --help --verbose
aufgeführt ist. Unter Windows - sehen Sie unter Diensteigenschaften nach, ob dies für Sie der Fall ist.
Überprüfen Sie schließlich die https://dev.mysql.com/doc/refman/8.0/en/option-files.html -, die dort ausführlicher beschrieben wird.
Sie könnten find immer in einem Terminal ausführen.
find / -name my.cnf
Sie können verwenden:
locate my.cnf
whereis my.cnf
find . -name my.cnf
Das könnte funktionieren:
strace mysql ";" 2>&1 | grep cnf
auf meinem Rechner gibt dies aus:
stat64("/etc/my.cnf", 0xbf9faafc) = -1 ENOENT (No such file or directory)
stat64("/etc/mysql/my.cnf", {st_mode=S_IFREG|0644, st_size=4271, ...}) = 0
open("/etc/mysql/my.cnf", O_RDONLY|O_LARGEFILE) = 3
read(3, "# /etc/mysql/my.cnf: The global "..., 4096) = 4096
stat64("/home/xxxxx/.my.cnf", 0xbf9faafc) = -1 ENOENT (No such file or directory)
Es sieht also so aus, als ob /etc/mysql/my.cnf der Fall ist, da stat64 () und read () erfolgreich waren.
Standardmäßig durchsucht mysql my.cnf zuerst im Ordner/etc. Wenn sich in diesem Ordner keine Datei /etc/my.cnf befindet, sollten Sie, wie in der Dokumentation angegeben, eine neue Datei in diesem Ordner erstellen ( https://dev.mysql.com/doc/refman/5.6/de) /option-files.html ).
Sie können auch nach vorhandenem my.cnf suchen, das von Ihrer MySQL-Installation bereitgestellt wird. Sie können den folgenden Befehl starten
Sudo find / -name "*.cnf"
Sie können die folgende Konfigurationsdatei mit der myisam-Tabelle und ohne die Unterstützung von innodb mysql verwenden (von der Port-Installation von mysql auf Mac os x maverick). Bitte überprüfen Sie jeden Befehl in dieser Konfigurationsdatei.
# Example MySQL config file for large systems.
#
# This is for a large system with memory = 512M where the system runs mainly
# MySQL.
#
# MySQL programs look for option files in a set of
# locations which depend on the deployment platform.
# You can copy this option file to one of those
# locations. For information about these locations, see:
# http://dev.mysql.com/doc/mysql/en/option-files.html
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
#password = your_password
port = 3306
socket = /opt/local/var/run/mysql5/mysqld.sock
# Here follows entries for some specific programs
# The MySQL server
[mysqld]
port = 3306
socket = /opt/local/var/run/mysql5/mysqld.sock
skip-locking
key_buffer_size = 256M
max_allowed_packet = 1M
table_open_cache = 256
sort_buffer_size = 1M
read_buffer_size = 1M
read_rnd_buffer_size = 4M
myisam_sort_buffer_size = 64M
thread_cache_size = 8
query_cache_size= 16M
# Try number of CPU's*2 for thread_concurrency
thread_concurrency = 8
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same Host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking
# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin
# binary logging format - mixed recommended
binlog_format=mixed
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-Host is not set
# but will not function as a master if omitted
server-id = 1
# Replication Slave (comment out master section to use this)
#
# To configure this Host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_Host=<Host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <Host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_Host='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-Host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-Host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /opt/local/var/db/mysql5
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /opt/local/var/db/mysql5
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 256M
#innodb_additional_mem_pool_size = 20M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 64M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
[myisamchk]
key_buffer_size = 128M
sort_buffer_size = 128M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout
Wie von konyak bemerkt, können Sie die Liste der Orte abrufen, in denen mysql nach Ihrer my.cnf
-Datei sucht, indem Sie mysqladmin --help
ausführen. Da dies ziemlich ausführlich ist, können Sie schnell zu dem Teil gelangen, für den Sie sich interessieren:
$ mysqladmin --help | grep -A1 'Default options'
Dadurch erhalten Sie eine Ausgabe ähnlich wie:
Default options are read from the following files in the given order:
/etc/my.cnf /etc/mysql/my.cnf /usr/local/etc/my.cnf ~/.my.cnf
Je nachdem, wie Sie mysql installiert haben, ist es möglich, dass noch keine dieser Dateien vorhanden ist. Sie können cat
angeben, um zu sehen, wie Ihre Konfiguration erstellt wird, und erstellen Sie bei Bedarf Ihren eigenen my.cnf
an Ihrem bevorzugten Speicherort.
Für Ubuntu 16: /etc/mysql/mysql.conf.d/mysqld.cnf
Versuchen Sie, mysqld --help --verbose | grep my.cnf | tr " " "\n"
auszuführen.
Ausgabe wird ungefähr so sein
/etc/my.cnf
/etc/mysql/my.cnf
/usr/local/etc/my.cnf
~/.my.cnf
Wenn Sie mit Homebrew auf einem Mac arbeiten, verwenden Sie
brew Info MySQL
Sie werden so etwas sehen
$ brew info mysql
mysql: stable 5.6.13 (bottled)
http://dev.mysql.com/doc/refman/5.6/en/
Conflicts with: mariadb, mysql-cluster, percona-server
/usr/local/Cellar/mysql/5.6.13 (9381 files, 354M) *
Diese letzte Zeile ist die INSTALLERDIR
gemäß den MySQL-Dokumenten
Ich weiß nicht, wie Sie MySQL in Ihrer Linux-Umgebung eingerichtet haben, aber haben Sie dies überprüft?
Habe meine gefunden
mysqld --help --verbose | grep my.cnf
Eine weitere Option ist die Verwendung des Befehls whereis.
Z.B. wo ist meine.cnf
mysql --help | grep /my.cnf | xargs ls
hier erfahren Sie, wo sich my.cnf
unter Mac/Linux befindet
ls: cannot access '/etc/my.cnf': No such file or directory
ls: cannot access '~/.my.cnf': No such file or directory
/etc/mysql/my.cnf
In diesem Fall ist es in /etc/mysql/my.cnf
ls: /etc/my.cnf: No such file or directory
ls: /etc/mysql/my.cnf: No such file or directory
ls: ~/.my.cnf: No such file or directory
/usr/local/etc/my.cnf
In diesem Fall ist es in /usr/local/etc/my.cnf
Abhängig von Ihrer Version von MySQL müssen Sie die verschiedenen Speicherorte durchsehen.
mysqld --help -verbose | grep my.cnf
For Homebrew:
/usr/local/Cellar/mysql/8.0.11/bin/mysqld (mysqld 8.0.11)
Default possible locations:
/etc/my.cnf
/etc/mysql/my.cnf
~/.my.cnf
Found mine here:
/usr/local/etc/my.cnf
Alle guten Vorschläge, in meinem Fall habe ich es an keinem dieser Orte gefunden, aber in /usr/share/mysql
habe ich einen RHEL VM und ich habe mysql5.5
installiert.
Sie können diesen Befehl auch ausführen.
mysql --help | grep cnf
Unter Ubuntu (direkte Bearbeitung):
$ Sudo nano /etc/mysql.conf.d/mysqld.cnf
für mich war es, dass ich "ENGINE = MyISAM" -Tabellen hatte. Nachdem ich sie in "ENGINE = InnoDB" geändert hatte, funktionierte es:).
Ich habe das xampp-Paket mit Apache, php and mysql
in ubuntu installiert. Die my.cnf
-Datei befindet sich im /opt/lampp/etc/
-Ordner. Ich hoffe es hilft jemandem.